LM Electric winch for construction 500-1000 lb, 110V and 230V

Product description

“Maximum load in pounds” version

For the “maximum load in kilos” version, see the Fixator LM 300-500kg construction winch (single phase from 110 to 240V) or the frequency variation or two-speed version capable of lifting loads ranging from 300 to 500kg (single phase from 208 to 240V).

The construction site winch with passing cable LM 500-1000 lbs is an electric winch for lifting materials or average loads ranging from 480 lbs to 1000-1100 lb (220 kg to 500 kg) without working height limitation.

These electric lifting winches can reach lifting capacities up to 2200lbs with the use of the hauling pulley UPS2T.

Benefits Users

  • Use suspended or fixed to the ground;
  • End stops high and low guarantee safety and avoid any damage to the devices or accidental release of the cable;
  • Possibility of doubling the lifting capacity and expecting up to 2200 lbs of lifted load thanks to the use of a lifting pulley and a reeving kit;
  • Pendant control included with the winches: the radio control allowing the control of winches without wire clutter is available as an option;
  • Load limiter electromechanical optional to stop the winch if the maximum load is exceeded.

Additional information

Weight N/A

LM 220 (480lb), LM 300S+ (660lb), LM 450 (1000lb), LM 500+ (1100lb)


1~230V, 1~110V


50Hz, 60Hz


Top limit switch: Yes
Bottom limit switch: Yes

Technical characteristics :

LM 220S+

LM 300S+





461H (110V)

461 E (230V)


461 B (110V)

461 C (230V)


485 lbs (220 kg)

660 lbs (300 kg)

1000 lbs (450 kg)

1100 lbs (500 kg)













49 ft/min


50 Hz - 46 ft/min (14 m/min)

60 Hz - 45 ft/min 


26 ft/min 


50Hz - 23 ft/min


60Hz - 26 ft/min (8 m/min)


77 lbs (35 kg)

75 lbs (34 kg)

70 lbs (34 kg)

75 lbs (34 kg)

Steel cable 

Ø 6.5-6.8 mm

6x19 galvanized steel with mixed core

Or Ø6.5 mm - 17x7 galvanized steel - ½ non-rotating

Ø 6.5-6.8 mm

6x19 galvanized steel with mixed core

Or Ø 6.5mm - 17x7 galvanized steel - ½ non-rotating

Ø 6.5-6.8 mm

6x19 galvanized steel with mixed core

Or Ø6.5 - 17x7 galvanized steel - ½ non-rotating

Ø 6.5-6.8 mm

6x19 galvanized steel with mixed core

Or Ø 6.5 - 17x7 galvanized steel - ½ non-rotating

*WLL: Working Load Limit


Electric winches for lifting equipment LM 220/300/450/500+ can be used in the sector of Building for lifting and hauling equipment, in the sector Elevators for the transport of material inside ducts, in the_Wind Power Sector for maintenance work.

Our winches LM 220, LM 300+, LM450 and LM 500+ with passing cable, for lifting equipment, can be equipped with a radio control, replacing the button box. Switching with the latter is easy thanks to the electrical outlet pre-installed on the winches. The radio control offers completely different working comfort. In fact, the lifting of equipment is carried out with more autonomy and less clutter with cables and cable extensions on site.

If installed in suspension, they can be hung on davit arms, fixapoutre beams, parapet brackets or under-lead consoles depending on your installation or installed on the ground using fixing brackets.

For lifting lighter loads, Fixator offers the range LM 90/250 capable of lifting material up to 250 kg (500 kg if reeled with a reeving pulley).

Equipment included:

Your product comes with…


4 button box Bottom limit stop | LM_250 Carrying handles | LM_300S+
Self-locking hanging hook 3-button box (except VFD version) 4-button box (VFD version) Up and down limit switches Carrying handle

Optional equipment:

Also remember to request a quote for additional security or comfort features.

Related Products

These products might also interest you…


You may also like…